Editor: Zied Driss

Mechanical Engineering Technologies and Applications Vol. 2

eBook: US $59 Special Offer (PDF + Printed Copy): US $108
Printed Copy: US $78
Library License: US $236
ISSN: 2811-0463 (Print)
ISSN: 2811-0455 (Online)
ISBN: 978-981-5124-13-2 (Print)
ISBN: 978-981-5124-12-5 (Online)
Year of Publication: 2023
DOI: 10.2174/97898151241251230201

Introduction

This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter.

Volume 2 includes the following topics:

Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor

The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.

Contributors

Editor(s):
Zied Driss
Laboratory of Electromechanical Systems (LASEM)
National School of Engineers of Sfax (ENIS)
University of Sfax (US)
Sfax, Tunisia




Contributor(s):
Ayoub Fajraoui
University of Tunis (UT)
Engineering National High School of Tunis (ENSIT)
Production and Energetics Laboratory (LMPE), Tunis
Tunisia


Aref Maalej
University of Sfax
National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM)
3038 Sfax
Tunisia
/
Department of Electrical and Electronic Engineering Science
University of Johannesburg
Johannesburg
South Africa


Amara Ibraim
Higher Institute of Technological Studies of Nabeul
Mrezgua University Campus
Mrezga
Tunisia


Ali Damak
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS)
University of Sfax (US), 3038 Sfax
Tunisia


Abderrahmane Horimek
Department of Mechanical Engineering
Ziane Achour University
Djelfa
Algeria


Bouziane Boudraa
LEAP Laboratory, Department of Mechanical Engineering
University of Mentouri Brothers
Constantine
Algeria


Farhat Abdelmoumene
Department of Mechanical Engineering
Ziane Achour University
Djelfa
Algeria


Houssam Chouikhi
University of Sfax
National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM)
3038 Sfax
Tunisia
/
Department of Mechanical Engineering
College of Engineering (CoE), King Faisal University (KFU), Hofuf, Al-Ahsa 31982
Kingdom of Saudi Arabia


Hatem Bentaher
University of Sfax
National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM)
3038 Sfax
Tunisia


Haythem Nasraoui
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS), University of Sfax (US)
3038 Sfax
Tunisia


Hedi Kchao
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS), University of Sfax (US)
3038 Sfax
Tunisia


Hajer Troudi
Laboratoire de Mécanique de Sousse (LMS)
Ecole Nationale d’Ingénieurs de Sousse (ENISo), 4023 Sousse, Université de Sousse
Sousse
Tunisie


Kamel Mehdi
University of Tunis (UT)
Engineering National High School of Tunis (ENSIT)
Production and Energetics Laboratory (LMPE), Tunis
Tunisia


Mokhless Boukhriss
Higher Institute of Technology Studies of Kairouan
Kairouan
Tunisia
/
Laboratory of Electromechanical Systems (LASEM)
National Engineering School of Sfax
Sfax University, Sfax
Tunisia


Mohamed Ali Maatoug
Higher Institute of Technology Studies of Kairouan
Kairouan
Tunisia


Mahdi Timoumi
Higher Institute of Technology Studies of Kairouan
Kairouan
Tunisia


Mohamed Fterich
University of Sfax
National School of Engineers of Sfax, Laboratory of Electromechanical Systems (LASEM)
3038 Sfax
Tunisia


Mohamed Brayek
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS)
University of Sfax (US), 3038 Sfax
Tunisia


Mohamed Ali Jemni
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS)
University of Sfax (US), 3038 Sfax
Tunisia


Mohamed Salah Abid
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS)
University of Sfax (US), 3038 Sfax
Tunisia


Moncef Ghiss
Laboratoire de Mécanique de Sousse (LMS)
Ecole Nationale d’Ingénieurs de Sousse (ENISo), 4023 Sousse, Université de Sousse
Sousse
Tunisie


Mohamed Ellejmi
Alpha Engineering International (AEI)
Sousse
Tunisie


Mohamed Salah Abid
Laboratory of Electro-Mechanic Systems (LASEM)
National Engineering School of Sfax (ENIS), University of Sfax
3038 Sfax
Tunisia


Nizar El Ouni
Higher Institute of Technology Studies of Kairouan
Kairouan
Tunisia


Nour Abdelkader
Laboratory of Dynamic of Engines and Vibroacoustics
University UMBB
Boumerdes
Algeria


Noureddine Ait-Messaoudene
Laboratoire des Applications énergétiques de l’Hydrogène (LApEH)
University Blida 1
Blida
Algeria


Rachid Bessaïh
LEAP Laboratory, Department of Mechanical Engineering
University of Mentouri Brothers
Constantine
Algeria


Rachid Renane
Laboratory of Aeronautical Sciences
Institute of Aeronautics and Space Studies
University of Blida 1, BP 270 Roud of Soumaa, Blida
Algeria


Rachid Allouche
Laboratory of Aeronautical Sciences
Institute of Aeronautics and Space Studies
University of Blida 1, BP 270 Roud of Soumaa, Blida
Algeria


Sobhi Frikha
Laboratory of Electro-Mechanic Systems (LASEM)
National Engineering School of Sfax (ENIS), University of Sfax
3038 Sfax
Tunisia


Zied Driss
Laboratory of Electro-Mechanic Systems (LASEM)
National School of Engineers of Sfax (ENIS)
University of Sfax (US), 3038 Sfax
Tunisia


Zoubeir Tourki
Laboratoire de Mécanique de Sousse (LMS)
Ecole Nationale d’Ingénieurs de Sousse (ENISo), 4023 Sousse, Université de Sousse
Sousse
Tunisie
/
LMS ENISo-Université de Sousse
Directeur de la Mission Universitaire de Tunisie en Allemagne, Godesberger Allee 103
53175 Bonn
Germany